Tuesday, August 30, 2011

Network to solve problems systematically

Network to solve problems systematically

Troubleshooting the network itself provides for professionals are
sometimes a challenge, many components involved in the connection and
must be checked. Our guide helps you step by step analysis of problems
in the network connection.

Your internet browser says only "server not found"? Or access to the
release of another PC does not work? Then probably the network
connection is disrupted, interrupted, or misconfigured. Find out the
cause of network problems is not always easy. The fault may lie with the
DSL router in the wiring or the wireless router configuration. It can
also defective network adapter in the PC or not configured properly or
the network is not set up correctly in Windows. And also a security
software can prevent successful network connection. With this set of
possible causes for network problems only helps a systematic
troubleshooting. Our step-by-step guide will help you.

The basic networking and Internet orders
To connect a PC directly via network cable to the router and enter the
web browser the IP address of the router. For example, a Fritzbox
http://192.168.178.1 is the default. In other router models used often
http://192.168.0.1. The correct address can be found in the manual of
the DSL router.

The Fritzbox is a widely used DSL router.
If this link does not work, so the web page of the DSL router does not
appear in the browser, either the router is misconfigured or faulty. Or
the network cable or network adapter of the PC are not in order. Repeat
the test at the best with another PC or notebook. Also check with the
ping command, if you can reach the DSL router.

To properly wire your LAN
You should also try to disconnect the DSL router from the mains and it
will take about a minute back in operation. Sometimes helps to reset the
configuration to factory setting. Some models have a reset button.
Absent in the Fritzbox this, but there is a recovery program. How you
use this, you can read for AVM Run the recovery program. Even if no
connection is possible, let the DSL router from your Internet provider
or check exchange.

No comments:

Post a Comment